BYD K9UB 1st gen 2018+
Category: Passenger Buses and Coaches
Brand: BYD
Model: K9UB
Generation: 1st gen
Year: 2018+
DCF for general support: FTS
Status:
- Validated by Squarell
- The DCF has been developed and should work, but it has not been physically checked. We suggest testing it before large-scale installation. Feedback to Squarell is desired for validation.
- In Progress, for the latest status please consult Squarell Sales
- Vehicle CAN Bus
- Requires 2nd CAN Bus connection
- Requires 3rd CAN Bus connection
- Requires J1708 connection
- Requires ISO11992 connection
- Requires Tachograph K-Line connection
- Requires Fuel Levels Sensor device. The installation of a Fuel Level Sensor requires advanced technical knowledge. Please review our manual for the required steps.
- Calculated parameter (this is as accurate as the combined tolerance of read values. as a result, the calculated value may deviate marginally from reality)
* Vehicle configuration dependent
| Parameters | Supported |
|---|---|
| Total Vehicle Distance | |
| Total Fuel Used | |
| Total Engine Hours | |
| Vehicle Speed | |
| Engine Speed | |
| Actual Fuel Used | |
| Actual Engine Torque | |
| Fuel Level | |
| Engine temperature | |
| Acc. Pedal Position | |
| Brake Switch | |
| Clutch Switch* | |
| Cruise Control State* | |
| Turbo Pressure | |
| Service Distance | |
| Kickdown Switch* | |
| Vehicle ID | |
| PTO state* | |
| Tachograph (1324+)* | |
| Tachograph Driver ID 1+2 | |
| Axle Weight* | |
| Doors Open Status* |
| Tell-tales | Supported |
|---|---|
| Front fog light | |
| Rear fog light |
