Irisbus / Iveco
Brand: Irisbus / Iveco
Model: Arway
Generation:
Year: 2005-2013
DCF for general support: TRKS
DCF for Tell-tale support: IVE
Status:
Installation Manual
  • Validated by Squarell
  • The DCF has been developed and should work, but it has not been physically checked. We suggest testing it before large-scale installation. Feedback to Squarell is desired for validation.
  • Vehicle CAN Bus
  • Requires 2nd CAN Bus connection
  • Requires 3rd CAN Bus connection
  • Requires J1708 connection
  • Requires ISO11992 connection
  • Requires Tachograph K-Line connection
  • Requires Fuel Levels Sensor device. The installation of a Fuel Level Sensor requires advanced technical knowledge. Please review our manual for the required steps.
  • Calculated parameter (this is as accurate as the combined tolerance of read values. as a result, the calculated value may deviate marginally from reality)
* Vehicle configuration dependent
Parameters Supported
Total Vehicle Distance
Total Fuel Used
Total Engine Hours
Vehicle Speed
Engine Speed
Actual Fuel Used
Actual Engine Torque
Fuel Level
Engine temperature
Acc. Pedal Position
Brake Switch
Clutch Switch*
Cruise Control State*
Turbo Pressure
Service Distance
Kickdown Switch*
Vehicle ID
PTO state*
Tachograph (1324+)*
Tachograph Driver ID 1+2
Axle Weight*
Doors Open Status*
Tell-tales Supported
High beam, main beam
Low beam, dipped beam
Turn signals
Hazard warning
Parking brake
Fuel level
Position lights, side lights
Front fog light
Rear fog light
Engine/mil indicator
Transmission failure/malfunction
Windscreen washer fluid/windshield washer fluid
Retarder
Engine emission system failure (mil indicator)
Brake lights
Go to Top