Irisbus / Iveco
Brand: Irisbus / Iveco
Model: Crossway
Generation: 3rd gen CNG
Year: 2013+
DCF for general support: TRKS
DCF for Tell-tale support: IVE
Status:
Installation Manual
  • Validated by Squarell
  • The DCF has been developed and should work, but it has not been physically checked. We suggest testing it before large-scale installation. Feedback to Squarell is desired for validation.
  • Vehicle CAN Bus
  • Requires 2nd CAN Bus connection
  • Requires 3rd CAN Bus connection
  • Requires J1708 connection
  • Requires ISO11992 connection
  • Requires Tachograph K-Line connection
  • Requires Fuel Levels Sensor device. The installation of a Fuel Level Sensor requires advanced technical knowledge. Please review our manual for the required steps.
  • Calculated parameter (this is as accurate as the combined tolerance of read values. as a result, the calculated value may deviate marginally from reality)
* Vehicle configuration dependent
Parameters Supported
Total Vehicle Distance
Total Fuel Used
Total Engine Hours
Vehicle Speed
Engine Speed
Actual Fuel Used
Actual Engine Torque
Fuel Level
Engine temperature
Acc. Pedal Position
Brake Switch
Clutch Switch*
Cruise Control State*
Turbo Pressure
Service Distance
Kickdown Switch*
Vehicle ID
PTO state*
Tachograph (1324+)*
Tachograph Driver ID 1+2
Axle Weight*
Doors Open Status*
Tell-tales Supported
High beam, main beam
Low beam, dipped beam
Turn signals
Hazard warning
Provision for the disabled or handicapped persons
Parking brake
Brake failure/brake system malfunction
Hatch open
Battery charging condition
Position lights, side lights
Front fog light
Rear fog light
Engine/mil indicator
Service, call for maintenance
Transmission failure/malfunction
Anti-lock brake system failure
Engine coolant level
Height control (levelling)
ESC indication
Stop request
Bus stop brake
Raising
Lowering
Kneeling
EBS
Go to Top