Especificaciones del SOLID+
Informaciones técnicas
DEVICE CONFIGURATION FILE (DCF) | |
---|---|
Configuration system | For data processing and parameter enhancement |
DCF memory | 320 kB |
CAN BUS | |
---|---|
Hardwired ports | 2 |
Hardware protocol | CAN V 2.0a, CAN V 2.0b |
Internal terminator | CAN port 2 only |
Via additional CANcliQ or DatacliQ | 4 |
Baud rate | Selectable: 10 – 1000 kBd |
Automatic baud rate detection | Yes |
Supported protocols | J1939, ISO11992, NMEA 2000, Proprietary |
Default device address | 240 |
J1708 | |
---|---|
Hardwired port | 1 |
Via DatacliQ | 1 |
Baud rate | 9600 Bd |
Protocols | J1587/J1922/Proprietary |
K-LINE | |
---|---|
Hardwired port | 1 |
Via DatacliQ | 1 |
Baud rate | 1200 – 20000 Bd |
Protocols DCF selectable | ISO 9141 (FAKRA)/ISO 9141-2 (OBDII/CARB) |
ISO 14230-2 (KWP 2000) | |
ISO 14230S (Swedish) | |
Initialisation | Slow/Fast |
Message timing | Configurable, with extended response time |
SPECIAL FUNCTION DEVICE PORTS (SFD) | |
---|---|
Hardwired ports | 3 |
SFD supply | 4.75 – 5.25 V |
SFD load | 100 mA per SFD, 300 mA max to all SFDs |
Default baud rate | 9600 Bd |
Port type | UART |
Signal level | CMOS |
OPTIONAL SFD’S | |
---|---|
DatacliQ | CAN (port 1, 2, autobaud), K-Line, J1708 |
Driver awareness | Driver Awareness Panel (DAP) |
Power Output Module | 8 high side drivers, 2 inputs |
BLUETOOTH | |
---|---|
Bluetooth | 2.1 and 4.0 LE |
ANALOGUE INPUTS | |
---|---|
Hardwired | 2 |
Input level | 0 – 30 VDS, resolution 1 mV |
Sample rate | 10 ms |
APPLICATIONS | |
---|---|
RTD | Remote Tachograph Download |
RDT | Tachograph Remaining Driving Time |
EDR | Squarell Event Data Recorder (SQ-EDR) |
TTS | Squarell Advanced Tell Tales Solution |
And many others |
LEDS | |
---|---|
DCF | Red: wrong DCF. Green/short red: 1 CAN port not connected. Green: OK |
Bluetooth | Blue led |
POWER | |
---|---|
Input voltage range | 10 – 30 VDC (power, ground) |
Electrical isolation | No |
Power consumption | 1.2 W average normal operation (49 mA at 24 VDC, 98 mA at 12 VDC) |
REAL TIME CLOCK (RTC) | |
---|---|
RTC | Included battery |
Time synchronisation | CAN bus message |
CERTIFICATION | |
---|---|
Regulations | E4, CE, UKCA, RoHS |
PHYSICAL CHARACTERISTICS | |
---|---|
Dimensions | 100 x 100 x 20 mm |
Weight | 110 g |
Material | PC-ABS |
Flammability rating | UL 94 V-0 |
Operating temperature range | -40 to 70 °C |
Storage temperature range | -40 to 85 °C |
Operating humidity range | 10 – 90% (non-condensing) |
Ingress Protection Rating | IP40 |
Designed and produced | In the Netherlands |
Tie-wrap mounting slots | 2 |
SUPPORT | |
---|---|
Product info | Scan QR code |
Diagnostic and upload program | iControl |
Reusable for other vehicles | Yes |
Warranty | 24 months |
BASIC SET | |
---|---|
Recommended | SOLID+, CANcliQ, power cable |