REMOTE specificaties

Technische informatie

DEVICE CONFIGURATION FILE (DCF)
Configuration system For data processing and parameter enhancement
DCF memory 320 kB
NETWORK CONNECTIVITY
Network protocols MQTT, TCP, HTTPS
2G bands GSM 850 MHz, E-GSM 900 MHz, DCS 1800 MHz, PCS 1900 MHz
4G bands LTE-M (2G fall back)
SIM Nano-SIM
Antenna Internal
User acknowledge Configurable
GLOBAL NAVIGATION SATELLITE SYSTEM (GNSS)
GNSS GPS, GLONASS, Beidou, Galileo
Cold start sensitivity -148 dBm
Accuracy (Open Sky) < 2.5 m (CEP50)
Hot start < 1 s
Cold start < 35 s
Data rate On changes steering angle and every 60 s and 500 m
Antenna External active antenna
Antenna type SMA
CO-PROCESSOR
Performance enhancement
Memory 4 MB
CAN BUS
Hardwired ports 2
Hardware protocol CAN V 2.0a CAN V 2.0b
Internal terminator CAN port 2 only
Via additional cliQ 4
Baud rate Selectable: 10 – 1000 kBd
Automatic baud rate detection Yes
Supported protocols J1939, ISO 11992, NMEA 2000, Proprietary
Default device address 240
J1708
Hardwired port 1
Via DatacliQ 1
Baud rate 9600 Bd
Protocols J1587/J1922/Proprietary
K-LINE
Hardwired port 1
Baud rate 1200 – 20000 Bd
Protocols DCF selectable ISO 9141 (FAKRA)/ISO 9141-2 (OBDII/CARB)
ISO 14230-2 (KWP 2000)
ISO 14230S (Swedish)
Initialisation Slow/Fast
Message timing Configurable, with extended response time
SPECIAL FUNCTION DEVICE PORTS (SFD)
Hardwired ports 3
SFD supply 4.75 – 5.25 V
SFD load 100 mA per SFD, 300 mA max to all SFDs
Default baud rate 9600 Bd
Port type UART
Signal level CMOS
OPTIONAL SFD’S
DatacliQ CAN (port 1, 2, autobaud), K-Line, J1708
Bluetooth 2.1 and 4.0 LE
Fuel level (if not present on CAN bus) Fuel Level Sensor
Driver awareness Driver Awareness Panel (DAP)
Power Output Module 8 high side drivers
ANALOGUE INPUTS
Hardwired 2
Input level 0 – 30 VDS, resolution 1 mV
Sample rate 10 ms
IGNITION LINE
Active on Yellow wire, or DCF control, or extension board control
APPLICATIONS
Vehicle performance Fuel consumption, odometer, engine temperature and engine hours etc.
Driver performance Accelerator and brake pedal usage, vehicle speed, cruise control usage etc.
Tacho live Live tachograph information
RTD Remote Tachograph Download
RDT Tachograph Remaining Driving Time
EDR Squarell Event Data Recorder (SQ-EDR)
TTS Squarell Advanced Tell Tales Solution
LEDS
Modem Slow on no connection, faster on connection, continue on connection with server
GNSS Flash on no GNSS, continue on GNSS signal
DCF Red: wrong DCF. Green/short red: 1 CAN port not connected. Green: OK
POWER
Input voltage range 10 – 30 VDC (power, ground)
Ignition line Yes
Electrical isolation No
Power consumption 1.2 W average normal operation (49 mA at 24 VDC, 98 mA at 12 VDC)
Sleep & deep sleep 150 mW in ultra sleep mode (6 mA at 24 VDC, 12 mA at 12 VDC)
Ultracapacitors 2.7 V 12 F 3 mAh – For shutdown and last resort call
Backup battery (optional) 1,2,3x 2600mAh (20 days heartbeat per cel)
REAL TIME CLOCK (RTC)
RTC Included battery
Time synchronisation Google NTP
EXTENSION BOARD
Relay optional
Blue tooth 2.1 optional
Wifi optional
1-wire optional
RS232 port optional
Customers request HW optional
CERTIFICATION
Regulatory E4, CE, UKCA, RoHS
Data protection certificates optional
PHYSICAL CHARACTERISTICS
Dimensions 100 x 100 x 20 mm
Weight 130 g
Material PC-ABS
Flammability rating UL 94 V-0
Operating temperature range -40 to 70 °C
Storage temperature range -40 to 85 °C
Operating humidity range 10 – 90% (non-condensing)
Ingress Protection Rating IP40
Designed and produced In the Netherlands
Tie-wrap mounting slots 2
SUPPORT
Product info Scan QR code
Diagnostic and upload program iControl
Micro-B USB port Support software
Firmware Over The Air (FOTA) From Squarell server
Reusable for other vehicles Yes
Reset button Yes
Warranty 24 months
DELIVERY PACKAGE
Recommended set REMOTE, CANcliQ, power cable and GNSS antenna