Category: Electric Passenger Buses and Coaches
Brand: BYD
Model: B13
Generation: 1st gen
Year: 2021+
DCF for general support: BYD-EV
Status:
- Validated by Squarell
- The DCF has been developed and should work, but it has not been physically checked. We suggest testing it before large-scale installation. Feedback to Squarell is desired for validation.
- Vehicle CAN Bus
- Requires 2nd CAN Bus connection
- Requires 3rd CAN Bus connection
- Requires J1708 connection
- Requires ISO11992 connection
- Requires Tachograph K-Line connection
- Requires Fuel Levels Sensor device. The installation of a Fuel Level Sensor requires advanced technical knowledge. Please review our manual for the required steps.
- Calculated parameter (this is as accurate as the combined tolerance of read values. as a result, the calculated value may deviate marginally from reality)
* Vehicle configuration dependent
Parameters | Supported |
---|---|
Total Vehicle Distance | |
Vehicle Speed | |
Acc. Pedal Position | |
Kickdown Switch* | |
Brake Switch | |
Cruise Control State* | |
Total Discharged Energy | |
Total Discharged Energy Driving | |
Total Regenerated Charge | |
Total Charged Energy | |
EV Motor Speed | |
Actual EV Motor Torque | |
Average Trip kW Consumption | |
ECO-mode Enabled | |
EV Motor Temperature | |
EV Traction Battery Current | |
EV Traction Battery Potential | |
EV Battery State Of Charge | |
EV Remaining Battery Range | |
EV Remaining Battery Time | |
Charging Cable Dis-/Connected | |
Charging Status | |
Remaining Charging Time | |
Service Distance | |
Vehicle ID | |
Park Brake Switch | |
Headlight / Indicators | |
Doors Open Status* | |
Tachograph* | |
Tachograph Driver ID 1+2 | |
Axle Weight* |
Tell-tales | Supported |
---|