SOLID+ specifications
Technical information
| DEVICE CONFIGURATION FILE (DCF) | |
|---|---|
| Configuration system | For data processing and parameter enhancement |
| DCF memory | 320 kB |
| CAN BUS | |
|---|---|
| Hardwired ports | 2 |
| Hardware protocol | CAN V 2.0a, CAN V 2.0b |
| Internal terminator | CAN port 2 only |
| Via additional CANcliQ or DatacliQ | 4 |
| Baud rate | Selectable: 10 – 1000 kBd |
| Automatic baud rate detection | Yes |
| Supported protocols | J1939, ISO11992, NMEA 2000, Proprietary |
| Default device address | 240 |
| J1708 | |
|---|---|
| Hardwired port | 1 |
| Via DatacliQ | 1 |
| Baud rate | 9600 Bd |
| Protocols | J1587/J1922/Proprietary |
| K-LINE | |
|---|---|
| Hardwired port | 1 |
| Via DatacliQ | 1 |
| Baud rate | 1200 – 20000 Bd |
| Protocols DCF selectable | ISO 9141 (FAKRA)/ISO 9141-2 (OBDII/CARB) |
| ISO 14230-2 (KWP 2000) | |
| ISO 14230S (Swedish) | |
| Initialisation | Slow/Fast |
| Message timing | Configurable, with extended response time |
| SPECIAL FUNCTION DEVICE PORTS (SFD) | |
|---|---|
| Hardwired ports | 3 |
| SFD supply | 4.75 – 5.25 V |
| SFD load | 100 mA per SFD, 300 mA max to all SFDs |
| Default baud rate | 9600 Bd |
| Port type | UART |
| Signal level | CMOS |
| OPTIONAL SFD’S | |
|---|---|
| DatacliQ | CAN (port 1, 2, autobaud), K-Line, J1708 |
| Driver awareness | Driver Awareness Panel (DAP) |
| Power Output Module | 8 high side drivers, 2 inputs |
| BLUETOOTH | |
|---|---|
| Bluetooth | 2.1 and 4.0 LE |
| ANALOGUE INPUTS | |
|---|---|
| Hardwired | 2 |
| Input level | 0 – 30 VDS, resolution 1 mV |
| Sample rate | 10 ms |
| APPLICATIONS | |
|---|---|
| RTD | Remote Tachograph Download |
| RDT | Tachograph Remaining Driving Time |
| EDR | Squarell Event Data Recorder (SQ-EDR) |
| TTS | Squarell Advanced Tell Tales Solution |
| And many others |
| LEDS | |
|---|---|
| DCF | Red: wrong DCF. Green/short red: 1 CAN port not connected. Green: OK |
| Bluetooth | Blue led |
| POWER | |
|---|---|
| Input voltage range | 10 – 30 VDC (power, ground) |
| Electrical isolation | No |
| Power consumption | 1.2 W average normal operation (49 mA at 24 VDC, 98 mA at 12 VDC) |
| REAL TIME CLOCK (RTC) | |
|---|---|
| RTC | Included battery |
| Time synchronisation | CAN bus message |
| CERTIFICATION | |
|---|---|
| Regulations | E4, CE, UKCA, RoHS |
| PHYSICAL CHARACTERISTICS | |
|---|---|
| Dimensions | 100 x 100 x 20 mm |
| Weight | 110 g |
| Material | PC-ABS |
| Flammability rating | UL 94 V-0 |
| Operating temperature range | -40 to 70 °C |
| Storage temperature range | -40 to 85 °C |
| Operating humidity range | 10 – 90% (non-condensing) |
| Ingress Protection Rating | IP40 |
| Designed and produced | In the Netherlands |
| Tie-wrap mounting slots | 2 |
| SUPPORT | |
|---|---|
| Product info | Scan QR code |
| Diagnostic and upload program | iControl |
| Reusable for other vehicles | Yes |
| Warranty | 24 months |
| BASIC SET | |
|---|---|
| Recommended | SOLID+, CANcliQ, power cable |